Reply
Mon 19 Jan, 2009 06:04 pm
I recently purchased a house that had been vacant for over 1 year. It has a Rainsoft Gold Water softener. I have cleaned the brine tank, add salt, and did several manual regenerations. Valve is moving no binding, no sounds of any leaks.
The water is still hard. I was hoping someone could tell me what the installer programming specs mean. Rainsoft wants $200.00 service call due to the fact that I live far from there shop understandable but if it’s something that I can fix myself why not. Below is what the settings are now.
C = 42
CP = 60
u = 0
L = 8
C = 10 08
dp = 1
R = cl rd
Searched high and low no one has much to say about programming specs.
It seem like everyone suggest replacing the control valve rather than checking the programming, why replace the horse if only a shoe is thrown?
Any and all help appreciated.
@AlanH,
Forward your email address to me and I will send you two PDFs on the Gold Series.
@H2O MAN,
alanrh AT sbcglobal DOT com AT=@ DOT=.
Thanks
H20
@AlanH,
My emails bounced back to me - I used the address you provided... ??
@H2O MAN,
My mistake should have been alanrh AT sbcglobal DOT net
Thanks again for your quick reply
@H2O MAN,
Would you please forward the two PDFs on the Gold Series as well? We are trying to program our Gold Unit as well. Thanks so much!
jlsowell@hotmail.com
@Jennlynn,
Have the requested PDF arrived?
@H2O MAN,
Could I please also have the PDF for the gold AQC 75 email to
bakerluck@comcast.net
Thank you, Dan
@H2O MAN,
Hello,
Can you please send me the manuals for the Rainsoft watersoftener. I have a AQC 50CV that has stopped automatic regenerations.
Thank You
dmkarberg@cableone.net
@calcam67,
I have a gold series Rain soft.....i think the back up battery died and i lost the programming when the power went out.....Can you send me any information so i can re program the unit. it will not cycle automatically i have to use the manual regenerate button. Please snd pdf files to
vintagewrench@aol.com...Thank you Ron
@H2O MAN,
I have the Rainsoft Gold Series and my water feels hard again. I replaced the neutralizer tank and the Holding tank in my well system. We lost power for a week and the Rainsoft rep wants an additional $250 just to come out and make sure it is programmed and check the water quality again. I know i can do this myself but the manual i have wont show how to reprogram the unit for Hardness settings
@H2O MAN,
Could you send me those pdf files, I also have a rainsoft that is not working correctly and can not find any info
ruvalcab.jb@sbcglobal.net, it will be greatly appreciated. Thanks.
@H2O MAN,
Can I also get the manual too. Thanks.
david.tsang@gmail.com
Email sent with Gold Series PDF attached.
Stumble It!
Tweet This
Bookmark on Delicious
Share on Facebook
Share on MySpace