What to be done when memory cards is broken

f your memory card is broken unfortunately,Please take it ease,Let me help you!These are eleven major problems and solutions of memory card as follows.
One: put the memory card in the computer to identify. On the cell phone it does not recognize!!
This situation is often because the memory card formats on the computer, but the format is not compatible with the mobile phone. Solutions are put the card right back into the cell phone and use cell phone the "format memory card" function of the cell phone to reformat!!
Two: mobile phone tips "pull out the memory card, press OK" . pull out will follow the prompts and pull out the card and the insert it into the cell phone,you will be able to continue to use the cell phone, but soon it has prompted to pull back the card, so repeatedly!!
This is because of often plugging a memory card, it results in loosening of bad cell phone memory card slot. You can consider going to the customer service about cell phone repair, and pay attention to hot-swappable cards not too much force .
Three: memory card password is lost, memory card file is very important!!
Download and install MMspwd software, after run the software, we can see a row of garbled, garbled interval shows in figure or in English is password!!
Four: the read and write speed of MMC card is more and more slow, much less than just bought .They are the same storage devices, the MMC memory card in the mobile phone is the same as in the computer .After a period of time it will appear the debris disk which will affect the read and write speed because of frequent delete and copy. however, hard disk format is FAT32 or NTFS, the MMC mobile card is FAT16.Therefore, the mobile phone through the computer's Disk Defragmenter will often occur a series of errors, serious error will occur in the MMC card inserted in the mobile phone.
In fact, we only need to copy MMC card hidden files and format the card and then copy the files into it.
Five: when plug memory card in mobile phone, it can not open the page, but it can when pull out!!
Unable to open web pages, or "network" without reflecting,since there are probably caused by the input method. Switch back to the original input method for solving the problem !!
SIX: MMC card of 1GBYTE, 600MB is copyed into the document, and then on computer is not possible to remove the memory card safely, so remove it, after put the memory card into the mobile phone, it displays "card in order to damage", such as in computer card connector, the computer does not recognize ! The memory card, which is disposable copy of the information of large capacity , occasionally can not be removed after the memory card of the situation,
it is recommended after the copy when separate groups of copy,If the cell phone memory card with the computer does not recognize, it could be: A: on client computer, use the FAT16 format to format. B: use force format tool MMCMEDIC to repair C: format the memory card directly in the mobile phone.
seven: when format the memory card, it shows "memory card to be used" .
To restart the mobile phone ,the problem is still there.Try to follow these steps: Shut down ----reswap memory card --- --- boot
EIGHT: A lot of procedures of the cell phone can not be normal operation. When the mobile phone is connected with memory card, it shows'"memory card does not exist and can not connect! "
'The situation is likely to be caused by the change of the name of memory card , resulting in procedural mistakes, as long as replacing the names of memory card in bulk everywhere in the registry in the computer notebookis OK!!
Nine: It shows "Can not use" after reformat the memory czrd.
First check whether the use of format is FAT32 format or not, if it is using FAT16 format, the problem still exists, you can try the computer system at the "Disk Utility" to repair .
Ten: multimedia photos, video files placed in the memory card can't be found suddenly .
Use memory card reader to connect with the computer, to determine their letter, open the computer's "Start" menu, select Run, press enter after type "CMD ", in the MS-DOS command, enter" VCHKDSK H: / F "