Sat 12 Apr, 2008 09:53 pm - Thanks for the response, gents.
Looks like I'm gonna look for micro-switches -- which are hard to find online. Also, I fried the clock motor by running stranded instead of solid wires from... (view)
Sat 12 Apr, 2008 12:02 pm - The piston on my Silver Series does the following:
1. Backwash for 5 minutes as set.
2. Brine Draw/Slow Rinse for 50 minutes which is normal.
3. Fast Rinses for a short period of time... (view)
Sun 30 Mar, 2008 03:04 pm - Gary, problem solved!
I can't believe how stupid I am to not notice the tiny hole of the nozzle (facing the throat) when I first cleaned it a few days ago. Phooey!
The calcium blockage... (view)
Thu 27 Mar, 2008 07:59 pm - Guys, I took the Silver Series apart except for the resin tank. Regeneration is working fine. Both cams for the piston and brine valve are ok. The brine valve assembly rubber stopper is worn off... (view)
Wed 26 Mar, 2008 01:53 pm - H2O Man,
With regards to the Silver Series, does it have an up flow or down flow piston? Why does it take a few minutes for it to start regeneration after holding down the manual regen lever?... (view)
Wed 26 Mar, 2008 01:17 pm - H2O Man, what does # of grains mean and what is recommended for a household of at least 8-10 persons?
Do you think my resin tank need a resin bed replacement? If so, what would you recommend?... (view)
Wed 26 Mar, 2008 01:09 pm - How much does a Fleck 2510SE cost?
How do you remove the control unit from the resin tank?
I want to take the head unit and resin tank apart and see what is inside them before I spend money... (view)
Wed 26 Mar, 2008 12:26 pm - I forgot to mention that I got colds so I'm a bit sensitive to the temperature outside which was 52 degrees last night. It's a good thing tho that you mentioned "freezing." The... (view)
Tue 25 Mar, 2008 10:28 pm - Yes, the timer is keeping and showing the current time of day.
I have yet to experiment blowing into the brine line but that will have to wait until tomorrow because it is so cold outside.... (view)
Tue 25 Mar, 2008 07:03 pm - Thanks for the quick response guys. :wink:
Yes, the control timer is good and the motor too; because I could hear a steady hum every time it is plugged in.
As to sucking on the control valve... (view)
