Mon 22 Feb, 2010 09:39 am - OK, it's been 9 months and I am back with a new problem.
Two regeneration cycles ago I noticed that the water in my brine tank was no longer clear (almost looked like a clear oil spill) in... (view)
Mon 25 May, 2009 04:55 am - Hello Gary,
Yep, the pressure drop would be great in the 15 to 20 gpm example that Gary S. mentioned, but please note that his example was in regards to softening properties and not excess... (view)
Sun 24 May, 2009 12:42 pm - Justalurker,
Gary Schreiber is one of the guys I talked with last week regarding SFR, and he confirmed that 5.0 gpm per cu-ft of resin should not be considered a maximum specification for... (view)
Thu 21 May, 2009 06:05 pm - Justalurker,
I know your going to fall down when I tell you this, but I am in agreement with you. When all is said and done I would like to operate with an approximate 7 day regen cycle, and... (view)
Thu 21 May, 2009 04:26 pm - justalurker,
You actually have a certain amount of hardness leakage even when you are below 5 gpm per cubic ft of resin.
I just checked my BLFC and it's the 0.5 gpm version. My brine... (view)
Thu 21 May, 2009 12:46 pm - Wow, sounds like I started one big mess (sorry).
I did talk with a Purolite technical manager (employee of Purolite, not a rep), and he walked me through their engineering bulletin which... (view)
Wed 20 May, 2009 06:47 am - Gary,
Thanks, and I new nothing about SFR before you guys provided info on the subject, but I assume based on the information you guys provided that exceeding the SFR capability of the resin... (view)
Tue 19 May, 2009 04:17 am - Hi guys.
My original question was about mush, and the next thing I know is that you guys tell me my unit is undersized which I feel is not a correct statement the more you guys talk. But based... (view)
Mon 18 May, 2009 05:46 pm - Justalerker,
OK, even though you are getting ticked off at me, you are finally starting to describe things to the point where I can understand what your trying to say. Great on the 3 pounds of... (view)
Mon 18 May, 2009 05:14 pm - Justalerker,
I know what BF means, and I already told you I had it set to 10 minutes, and I can set it longer. I said setting this factor is the only way I could generate more brine as far as I... (view)
