Rainsoft Gold 75 Flow Meter

Shut off the water to the house and softener. Open and close a faucet to relieve system pressure. Put the bypass valve in bypass. Remove the screw on each side of the bypass valve that holds the steel clips on. Remove the control valve from the bypass valve and then remove the meter, clean it and up in the outlet of the softener. Blow on the meter wheel and watch for an indication that the meter is counting down and reassemble.

That should do the trick

thanks Gary! you da man! I will play with it tonight!

Mik

Before you tear it down, make sure both ends of the sensor wire are clean and securely plugged in.